-  3.5-inch color LCD screen for a simple and user-friendly interface

-  Measures residual chlorine, chlorine dioxide, and ozone

-  Easily switch between residual chlorine mode and ozone mode via the menu

-  Enables control of drug dosing

-  Supports 4-20mA and RS485 communication protocols

-  Offers multiple calibration methods

-  Includes temperature compensation for accurate readings

-  Protective back cover for enhanced durability and anti-interference

-  Optional data saving and export functions for easy data management

-  Constant voltage electrode with a simple structure, allowing for easy cleaning and replacement

-  Built-in storage chip saves up to one year of historical data and supports data export via mobile Bluetooth (optional)

The post Residual Chlorine Cl2 analyzer appeared first on Milktronics Online instruments.

The post Metrohm 7010 TOC appeared first on Milktronics Online instruments.

• High temperature turbidity, remote electronics, water product changeover
• CIP, HTST improvements, silo to silo, separator, FAT monitoring, Moisture control
• Deviation: 0,1%,
• 300F process continious, 360F for 20 minutes
• Probe seal : kalrez as a standard
• Sapphire lens
• Process fitting: Tri-clamp 1.5", 2",2.5",3" or flange or welded coupling
• Cable : 33ft PVC
• Extended history is available via a USB port.
• HART available
• Power 24VDC, Output (1) 4-20mA (turbidity), Output (2) 4-20mA (temperature)

Easy to install, the meter will read 50 times / seconds the product consistency. When the change happens (water to product to water) the detection is done instantly. The meter has a 4-20mA output easily calibrated and connects to any automation or PLC. Plug and play sensor , robust and affordable for any budgets...

Manufacturer : Satron INC Tampere

Recommended ordering code : VOM HJ223NRT417TB

The post Online turbidity meter Aseptic processes High temperature process appeared first on Milktronics Online instruments.

• Absorption Range : 0-10-50-1500 FTU-NTU-g/L-%...(any range available)
• High temperature option available 300°F  150°C
• 100°C (212°F)  150°C (300°F) continious with high temperature option
• LED long life aging auto-compensated
• 180° light transmission.
• Power: 24VDC Output : 4-20mA
• HART protocole
• seals: EPDM, Viton, Kalrez
• 1" to 6" pipe diameter available
• Wavelength infrared (880nm NIR)
• Auto-cleaning available

The post 5 NTU reverse osmosis appeared first on Milktronics Online instruments.

• Integrated display
• Tri-clamp 1.5",2",2.5", welded coupling or flange
• Process ; 100C (212F) continious, 120C (240F) for 30 minutes
• Turbidity range 0-25000NTU
• Sapphire lens
• EPDM o-rings or Kalrez or Vitton
• power 24vdc M12 connectors
• Output (1) 4-20mA, Output (2) 4-20mA temperature
• HART compatible
• Extended history

The meter is placed right before the storage tank and the drain valve. When the product turns into water the meter sends a signal to open the drain valve or shut the pump. Savings are made on water, COD, time and energy.

The post Truck intake/outtake appeared first on Milktronics Online instruments.

• Highly sensitive to detect water or moisture in cream up to 60% consistency
• Perfect for cream consistency and FAT% measurement
• Process temperature: 0-100% designed for CIP
• Power 24VDC Output (1) 4-20mA Tubidity, Output (2) 4-20mA Temperature
• Process fitting: tri-clamp 1.5", 2", 2,5", 3", welded coupling or flange
• Different display option available
• 

Applications in dairies:

-Cream cheese Moisture

-Milk cream FAT%

-Any thick product consistency

Most common codes for this unit:

With local display: VOMNJ221N0T009TB . VOMNJ223N0T009TB

With remote display: VOMJ221L0V429TB .  VOMJ223L0V429TB

Without display: VOMJ221H0T009TB .  VOMJ223H0T009TB

The post High FAT 0-60% Moisture analyzer appeared first on Milktronics Online instruments.

• BackScattering  LED wavelength Blue 460nm
• Suitable for CIP
• Detects traces of colored fruit in milk product.
• Power 24 VDC
• Output (1) 4-20mA turbidity/color
• Output (2) 4-20mA temperature
• Stainless steel sensor 316L  probe
• Process fitting tri-clamp 1.5",2",2.5"

The post Fruit consistency in milk product appeared first on Milktronics Online instruments.

• Integrated display
• Tri-clamp 1.5",2",2.5", welded coupling or flange
• Process ; 100C (212F) continious, 120C (240F) for 30 minutes
• Turbidity range 0-25000NTU
• Sapphire lens
• EPDM o-rings or Kalrez or Vitton
• power 24vdc M12 connectors
• Output (1) 4-20mA, Output (2) 4-20mA temperature
• HART compatible
• Extended history

On HTST, the meter is placed right before the storage tank and the drain valve. When the product turns into water the meter sends a signal to open the drain valve or shut the pump. Savings are made on water, COD, time and energy.

Download (PDF, 297KB)

The post HTST end flush appeared first on Milktronics Online instruments.