• High temperature turbidity, remote electronics, water product changeover
• CIP, HTST improvements, silo to silo, separator, FAT monitoring, Moisture control
• Deviation: 0,1%,
• 300F process continious, 360F for 20 minutes
• Probe seal : kalrez as a standard
• Sapphire lens
• Process fitting: Tri-clamp 1.5", 2",2.5",3" or flange or welded coupling
• Cable : 33ft PVC
• Extended history is available via a USB port.
• HART available
• Power 24VDC, Output (1) 4-20mA (turbidity), Output (2) 4-20mA (temperature)

Easy to install, the meter will read 50 times / seconds the product consistency. When the change happens (water to product to water) the detection is done instantly. The meter has a 4-20mA output easily calibrated and connects to any automation or PLC. Plug and play sensor , robust and affordable for any budgets...

Manufacturer : Satron INC Tampere

Recommended ordering code : VOM HJ223NRT417TB

The post Online turbidity meter Aseptic processes High temperature process appeared first on Milktronics Online instruments.

Perfect tiny phase transition sensor for Milk, cream, dairy products, CIP, HTST. Water to product to water , spill detection. ROI is very fast.

The technology is coming from Satron Instrument Finland www.satron.com

• Power: 24VDC  Output 4-20mA active online turbidity
• Process coupling: tri-clamp 1.5", 2"
• Turbidity range 0-300 000 NTU adjustable
• Response time: 0 to 30 sec adjustable
• Lens: Sapphire
• Color independent 880 nm Near infra red (other wavelengths available)
• Ambient: -22°F to 176°F
• Process temperature : 212°F continuous, 320°F with high temperature option
• Deviation 0.1%
• Operating pressure -1 to 30Bar (-14 to 435PSI)
• No drift possible, no re-calibration.
• Seals : EPDM, compliant 3A and EHEDG and FDA
• HART compatible
• Approved : 3A, EHEDG, CE, SGS (UL)

With the same design meter you can also Monitor FAT.

The post Suspended solids turbidity meter appeared first on Milktronics Online instruments.