-Turbidity meter with retractable option Model: Satron VOMNJ221NRT427B1 Retractable turbidity meter

-pH probe model Emerson 3900VP pH 3900 VP

-pH transmitter Emerson Model 1056 1056 Information

-pH service valve for easy retraction of the pH probe Model PASVE PASVE information

-Maselli Refractometer UR62 Maselli UR-62

-Spool piece pie Stainless steel 304 0r 316L

-Flange size depends on pipe diameter

-Flange material is PVC for PVC pipe installation

-Flange Material is SST for STT pipe installation

The spool piece fits on any PVC or Stainless steel pipe. Both measurement have a remote display, powered with 24VDC and have a 4-20mA output.

The calibrations are usually as such:

-turbidity 4mA= water, 20mA = full product (customizable)

-pH 4ma=1pH, 20mA=14pH (customizable)

Both measurement can be replaced by a refractometer for Brix measurement.

The post Turbidity pH refract measurement combo appeared first on Milktronics Online instruments.

-Retractable

-Tip of the sensor middle of the flow

-4-20mA output, 24VDC input

-100% stainless

-Turbidity range 0-300000NTU

Perfect for waste water COD estimation and to divert the flow when COD/turbidity is too high.

The post On pipe waste water Turbidity management appeared first on Milktronics Online instruments.

• Probe extension possible.
• Power: 24VDC
• Range 0-20-100-1500 NTU
• LED long life NIR 880nm or 590 nm
• Aseptic option available
• Process temperature 212F continuous
• Process temperature up to 300 F (with high temperature option)
• Output 4-20mA Turbidity
• HART compatible

The post Absortion 0-1500NTU retractable appeared first on Milktronics Online instruments.

Perfect tiny phase transition sensor for Milk, cream, dairy products, CIP, HTST. Water to product to water , spill detection. ROI is very fast.

The technology is coming from Satron Instrument Finland www.satron.com

• Power: 24VDC  Output 4-20mA active online turbidity
• Process coupling: tri-clamp 1.5", 2"
• Turbidity range 0-300 000 NTU adjustable
• Response time: 0 to 30 sec adjustable
• Lens: Sapphire
• Color independent 880 nm Near infra red (other wavelengths available)
• Ambient: -22°F to 176°F
• Process temperature : 212°F continuous, 320°F with high temperature option
• Deviation 0.1%
• Operating pressure -1 to 30Bar (-14 to 435PSI)
• No drift possible, no re-calibration.
• Seals : EPDM, compliant 3A and EHEDG and FDA
• HART compatible
• Approved : 3A, EHEDG, CE, SGS (UL)

With the same design meter you can also Monitor FAT.

The post Suspended solids turbidity meter appeared first on Milktronics Online instruments.

Suspended solids monitoring

Designed for CIP/SIP. Perfect for all industries.

• • Power: 24VDC
  • Range 0-300000 NTU
  • Deviation 0.1%
  • LED long life
  • No drift possible, no re-calibration, electronics aging compensated.
  • All process fittings available
  • Tri-clamp 1.5", 2", 2.5"
  • Aseptic option available
  • Process temperature : 220 F continuous
  • Process temperature: 300 F continuous (with high temperature option)
  • HART protocol
  • Output (1) 4-20mA Turbidity / suspended solids
  • Output (2) 4-20mA Temperature
  • Seals choice: EPDM, Viton, Kalrez
  • Wetted parts choice : Aisi316L (standard), HAST, Titanium, Duplex
  • Automatic cleaning available
  • 3A, EHEDG, UL, FDA, CE certificates available
• Applications food and beverages
  • CIP improvement
  • product to water to product interphase detection
  • color changes in thick product
  • HTST improvement
  • FAT monitoring
  • COD estimation

The post VOM 0-300000NTU Turbidity meter Tri-clamp appeared first on Milktronics Online instruments.