Description
Ultrasonic foam control for aseptic filling lines
The Sinaptec aseptic ultrasonic defoamer compresses foam above bottles and cans without contacting the product. Its acoustic action makes the foam denser, helping control foam during filling. The aseptic probe configuration is designed for integration into filling equipment for dairy, beverage and other process applications.
Aseptic probe design
- 316L stainless-steel housing with a titanium TA6V Grade 5 horn.
- DN40 clamp connection with EPDM gasket for routing the ultrasound cable and pneumatic lines.
- IP66 protection when the cable, pneumatic connections and DN40 clamp are correctly fitted.
- Generator control with local or remote start/stop and adjustable amplitude.
Probe specifications
| Model | DEFOAMER-20K-D48-CA |
|---|---|
| Nominal frequency | 20 kHz ±300 Hz |
| Maximum probe power | 200 W RMS |
| Horn diameter | 48 mm |
| Probe weight | 5.4 kg |
| Mounting | Two M8 fixing points; suitable mounting bracket required |
| Ultrasonic cable | 15 m standard |
Installation and quotation
The probe operates vertically above the foam without horn contact or immersion. Dry, clean compressed air is required for cooling. Ultrasound must be switched off during CIP cleaning or washdown. Confirm the mounting arrangement, utility requirements and compatibility with your cleaning and sterilization protocol for the supplied configuration.
Contact Milktronics with your product, container format, filling speed and available installation space to select the appropriate configuration.
Downloads
Sinaptec aseptic ultrasonic defoamer instruction manual — English, December 2024 (PDF)
Specifications above are based on the December 2024 Sinaptec instruction manual.
